Celebrate 10 years of the Halo franchise with these action figures!
Collect all figures to build a Difficulty Plaque!
Your favorite characters from previous series, brought back and better than ever!
Originally released back in 2008 in the first series of Halo action figures, Cortana returns for the 10th Anniversary of the Halo franchise. This 4 3/4-inch tall figure features clear blue plastic and a light-up base to represent her holographic appearance. Cortana also comes with a knife for the Difficulty Plaque that can be added to upgrade it to "Normal" difficulty. Requires 2x "AAA" batteries (not included). Ages 8 and up.
The Difficulty Plaque is the first Halo "build-a-figure" item. This iconic symbol has been featured in every Halo game, and is the perfect emblem to celebrate ten years of Halo. The Difficulty Plaque is only available by collecting these special Anniversary figures, and the more you collect, the higher the difficulty you can create! The completed plaque measures approximately 3 1/2-inches tall, and comes with attachments for displaying it on a desk or hanging it on a wall. Collect all five pieces!
Upc: 787926189124
|
DIAMOND COMIC DIST.-STOCK
(W) John Layman (A) Alberto Ponticelli (CA) Darrow, Alberto Ponticelli
Detective Makoto Sato is on an unrelenting quest to bring down the Takahashi crime syndicate. Sato's efforts earn him a one-way trip to a tropical getaway, courtesy of the Tokyo criminal underworld. The exotic locale? Monster Island! Alone and facing death at the hands of both gangsters and goliaths, Sato must use his wits to survive-and enlist the aid of some most unusual friends.
Upc: 82771400250800151
|
Bring home everyone's favorite friend from Star Wars, R2-D2! What better way to celebrate the holidays than to have R2 bring you gifts in this cute bobble-head figure from Funko. Official product.
Upc: 830395083896
|
Top Quality New Female figure body from TB Legue/Phicen
1/6th Scale with 33 points of articulations.
Seamless on the body and you cannot see any joint! It is covered by rubber.
Tan Skin Tone
3 skin tones are available
Comes with 2 pairs of hands and 1 pair of feet
|
In light of the 40th Anniversary of Night of the Living Dead, everyone's favorite undead favorites have been resurrected in poseable action-figure form! The first two figures in a Dead figure series will be released - modeled after fan-favorite Bill Hinzman, a.k.a. The Graveyard Zombie, and Duane Jones, a.k.a. Ben, the film's hero. With heads sculpted by popular figure artist James Brady, the series of NOTLD action figures will feature classic rotocast plastic-style and MEGO-style blister packaging, with illustrations from artist Harold Shull.
Upc: 894780002695
|
Sideshow is pleased to announce from Medicom Toy Corporation the 12-inch RAH R5-D4 figure. The figure is highly authentic and film accurate, and ready to take life on your shelf in any dynamic pose that you desire. Medicom Toy's RAH body is one of the most articulated 12-inch figure bodies available, capable of nearly any pose that the human (or droid) body can achieve.
Please note: The Medicom RAH series is highly detailed, very well articulated, and of exceptional quality, however, the Medicom 12-inch RAH line is not in the same scale as the Sideshow 12-inch figure line. Please note that the Medicom figures are crafted in a slightly smaller scale than the Sideshow figures.
|
Add some Halloweentown flair to your spice rack! Need some seasoning? Reach for the smiling face of Jack Skellington! Delightful set of stackable salt and pepper shakers. Add some Halloweentown flair to your spice rack with this Nightmare Before Christmas Stackable Salt and Pepper Shaker Set. Featuring the smiling face of Jack Skellington from Tim Burtons classic The Nightmare Before Christmas , these salt and pepper shakers are stackable, too! Order yours today!
Upc: 634482280867
|
This is a 1:6 scale accessory meant for 12 Inch action figures.
|
WWE World Championship Attitude Edition Classic Belt with new WWE logo 6th plate. This is the WWE WORLD HEAVYWEIGHT Full Size Exact Replica. It is taken from a mold of the ORIGINAL Belt with the new WWE logo added. It is the same thickness and length as the original belt. It measures 4 feet 6 inches in length and weighs over 4 pounds. The center medallions measures 10 inches tall. It has 2 medallions on each side. Medallions are ornamented by 12 simulated diamonds. The strap is made out of our New and Improved simulated leather. It is fastened by 8 snaps on each side. Fits up to a 46 inch waist. Belt comes in a cloth bag with a WWE logo on it. LIMITED EDTION.
|
This is a 1:6 scale head sculpt meant for 12 Inch action figure bodies. Model number HP-0074.
|
This is a 1:6 scale head sculpt meant for 12 Inch action figure bodies. Model number HP-0077.
|
After turning in brilliant seasons for the Indians, Phillies, Mariners and Rangers, Cliff Lee became baseball's most sought-after free agent last winter. With offers from several teams, the 2008 Cy Young Award winner chose Philadelphia, where he strengthened one of the best pitching rotations in the game. Philadelphia has run away with the N.L. East and now looks for a return to the World Series.
Upc: 787926716443
|
The fourth Green Lantern from earth is also the fourth of our exclusive 8" Retro-Action DC Super Heroes! Kyle Rayner comes with a striking black & white cloth outfit and power battery, and is packed on a vintage style card that would get thumbs up from this graphic artist superhero! Complete your Green Lantern Retro Action DC Super Heroes collection with this final figure!
|
Sculpted by: Digital figure by Khurram Alavi; digital throne by Avinash Hegde
15 ½” tall overall
Throne is 17 ½” wide and 11” deep (shown with Wolverine for size reference - not included)
|
Calgary Stampeders Mini Speed College Football Helmet. The ultimate CFL mini speed football helmet collectible, perfect CFL mini speed football helmets for autographs and collectors. Mini Speed Football Helmet with great graphics. Official CFL Mini Speed Football Helmet with official CFL team decal. ABS plastic Mini Speed Football Helmet shells with plastic facemask. Realistic interior foam padding, vinyl-leather chin strap. This is an affordable NCAA football helmet for the true fan. Size: 1/2 scale versions of NCAA football helmets. Size: 6"(L), 4"(W), 5"(H) - (NOT FOR WEARING).
|
Ancient spirits of evil, transform this decayed for to... Mumm-Ra the Ever-Living! Icon Heroes presents classic Thundercats villain Mumm-Ra as this massive deluxe "staction" figure, standing over 9" tall and featuring a width of 11" from cape tip to cape tip. Packaged in an illustrated gatefold window box, and featuring a special diorama insert featuring Mumm-Ra's Tomb Fortress setting!
Upc: 793573700773
|
High level real like headsculpt x 2.
New ZCWOR female body (abs material,prevent dyeing on skin surface).
Brown outfit and accessories.
Limited 300 pieces Worldwide.
|
The Commander Gree 12 inch Figure features:
•Armored Body with Phase II Helmet Portrait
•Unmasked Portrait
•Blastech DC-15A Blaster Rifle
•Blastech DC-17 Pistol
•Blastech DC-15S Blaster
•Macrobinoculars
•Two (2) pairs of switch-out feet (action and standing)
•Generous assortment of switch-out hands
Product Size:12" H (304.8mm)
Artists:
•Tim Niver
•Tim Hanson
•Jared Chapman
•David Whitford
•The Sideshow Collectibles Design and Development Team
Manufactured by: Sideshow Collectibles
Product Backstory
Clone Commander Gree, designation 1004, led the Elite Corps stationed on Kashyyyk during the Clone Wars. He served under General Yoda, commanding troops that employed specialized equipment for combat in the jungle environment. Though a faithful commander following Yoda's orders, Gree was ultimately loyal to the Republic. When Chancellor Palpatine enacted Order 66, Gree understood it was a worst-case scenario contingency -- the Jedi must have betrayed the Republic and were therefore dangerous enemies of the state.
Gree attempted to open fire on Yoda from behind in order to take out the Jedi Master before he had time to react, but he poorly underestimated Yoda's perception. Before he could squeeze the trigger on his rifle, Yoda flipped up and backwards out of the field of fire, decapitating the clone commander with one quick swipe of his lightsaber.
Mint and complete only used for display
|
High level real like headsculpt (Detailed skin texture and eyes painting).
New ZCWOR female body (abs material,prevent dyeing on skin surface).
Black outfit and accessories.
Limited 300 pieces Worldwide.
|
Watch your diet, little Domo-kun! Not everything that Domo eats is good for his digestion. The kittens that Domo hunts may be ideal for his nutrition, but they might also make him gassy. Yes, even Domo, Japan's beloved monster mascot, will pass gas and break wind. When you squeeze this 6 1/2" tall Domo plush, the little monster will feel some intestinal relief while you giggle as Domo makes farting sounds.
Upc: 854036003135
|
First displayed at the Ron English signing at the SDCC 2010 Kidrobot booth, the Figment Bust brings to unlife the legendary artist Andy Warhol and is now available in this violet and green edition. Standing 13" tall, 10" deep, and 9" wide, the Ron English Figment Bust is limited to just 100 pieces worldwide.
Upc: 603259022580
|
Part List:
1. Headsculpt
2. Action body
3. Black hat
4. White shirt
5. A red tie
6. Black vest
7. Black leather trench coat
8. Black trousers
9. Black socks
10. Black and white shoes(1) PAIR
11. Glove Palm(1) PAIR
12. AR-7 Explorer
13. AR-7 8round mag
14. AR-7 15round mag
15. G17 pistol
16. G17 17round mag
17. G17 19round mag
18. G17 31round mag
19. Black round sunglasses
20. Pipe21. Long scarf
22. Large black leather bag
|
Opening doors, trunk and hood. Pose able Steering Detailed 283 Engine Detailed Undercarriage Roll Cage Rubber Tires
Functional Suspension
|
Minimates Vehicles Series 3 A Diamond Select Release! Designed and Sculpted by Art Asylum! Introducing three more ways for your Minimates to get around! This new assortment marks the debut of the evil Knight Rider vehicle KARR (with Garth Knight Minimate), an Armored Personnel Carrier with Driver and a new Pirate Ship with crew member. Each vehicle can accommodate multiple 2.5-inch Minimate figures, and is packed on a blister card.
This Listing is for Armored Personnel Carrier
Upc: 699788729571
|
DARK HORSE COMICS
4 1/2" tall, limited to 750 numbered pieces
Packaged in its own tin box, with a pin-back button and character booklet
$49.95
We now offer the fourth in the Disney Comics & Stories lineup-it's none other than the lovable Mickey Mouse. This is our first-ever depiction of this Disney mainstay. It will be a companion piece to next month's offering: The Phantom Blot.
The Disney Comics & Stories Characters series depicts the cartoon characters as they were in the comics, but they are also somewhat more rough hewn than is common, with features including rough surface textures, visible seam lines, and other slightly "distressed" aspects.
Upc: 761568188141
|
ZC Black Bunny List:
- High Level Real Like Headsculpt (Detailed skin texture and eyes painting)
- New ZCWO Female Body (ABS Material, Prevent dyeing on skin surface)
- Black Bunny Outfit and accessories
LIMITED 300pcs WORLDWIDE
-Red office chair included
|
Red Spartan bobbles his way into your collection!
Rotating arms!
Taking down the Covenant, one bobble at a time!
From the popular Halo franchise comes this Red Spartan bobble head. This bobble head stands approximately 6-inches tall atop a Spartan Mark V display base.
|
The Clone Trooper Premium Format figure captures every detail of the armored trooper with outstanding detail. Each piece is individually painted and finished to exacting standards, each with its own unique quality and detail that is the trademark of a handcrafted Sideshow Collectibles product. Dressed in a fabric body suit with armor plating and detailed accessories, the Clone Trooper Premium Format Figure is the perfect addition to any Star Wars display.
Product Size: 19" H (482.6mm) x 17" W (431.8mm) x 9" D (228.6mm)
Product Backstory
At the time of their introduction, the Republic clone trooper represented the future of galactic warfare. Far superior to the battle droid armies of the era, the clone troopers formed the backbone of the Republic's new military initiative that battled against the forces of the Confederacy of Independent Systems. So pervasive and symbolic were they of the times, the galaxy-wide conflict that saw their debut took its name from their ranks: the Clone Wars. It would be a long and bloody conflict in the years to come, but the efficiency of the clone trooper infantry would be proven time and again on many scattered worlds.
According to Jedi investigations, the clone army was apparently commissioned by one of their own a decade prior to their introduction on the battlefield. Using the original genetic code of bounty hunter Jango Fett, the Kaminoans carefully tampered with the material to produce clones with diminished independence and accelerated growth. For a decade's time, the clones were constantly trained in fighting techniques, vehicular skills and battlefield tactics. Yet, they still maintained a spark of independent and creative thinking, making them far better suited than droids to handle the unexpected turns of warfare.
Identical in form, physical prowess, stamina and mental capacity, each of the first generations of clone troopers were fully encased in hard white armor, each identical face concealed behind a t-shaped visor. Eventually, color-coded flashes on the armor denoted rank and later came to signify individual units, who often became more customized with mission specific gear and armor modifications.
|
BOOM! Straight from the pages of DC Comics - The New 52 comes a brand new take on one of the Justice League's most powerful villains -- Darkseid! This Apokaliptic conqueror will crush all who oppose him -- so start building your defenses today!
|
DC COMICS
Art by Jill Thompson
For the first time ever, images from Vertigo's beloved Endless family are presented in a format perfect for framing!
Twelve images by Eisner award-winning author and illustrator Jill Thompson (six images from THE LITTLE ENDLESS STORYBOOK and six images from DELIRIUM'S PARTY: A LITTLE ENDLESS STORYBOOK) are printed on high-quality 4-color matte paper stock, collected in a 4-color folder and shrink-wrapped together. All 12 prints measure approximately 8" x 10" and are ready for instant framing.
Upc: 761941303352
|