Scale: 1/32 scale model
Wing Span: 12.75
Length: 7.75
CX5T
|
Scale: 1/200 scale model
Wing Span: 12
Length: 14
CYAL1ATR
|
Scale: 1/78 scale model
Wing Span: 18
Length: 6.75
CYGHA1TR
|
Scale: 1/72 scale model
Wing Span: 18
Length: 6.75
CYGHATR
|
This handcrafted Sopwith Camel 1/20 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Sopwith Camel was a British World War I single-seat biplane fighter. Though difficult to handle, to an experienced pilot it provided unmatched maneuverability. The Camel was a superlative fighter; it was credited with shooting down 1,294 enemy aircraft, which was more than any other Allied fighter of the war. It also served as a ground-attack aircraft, especially near the end of the conflict, when it was outclassed in the air-to-air role by newer fighters.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/20 scale model
Wing Span: 17
Length: 11.25
FBSCTE
|
This handcrafted Sopwith Camel 1/24 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Sopwith Camel was a British World War I single-seat biplane fighter. Though difficult to handle, to an experienced pilot it provided unmatched maneuverability. The Camel was a superlative fighter; it was credited with shooting down 1,294 enemy aircraft, which was more than any other Allied fighter of the war. It also served as a ground-attack aircraft, especially near the end of the conflict, when it was outclassed in the air-to-air role by newer fighters.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/24 scale model
Wing Span: 14.25
Length: 9.75
FBSCT
|
This handcrafted Sunderland Flying Boat 1/72 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The S-25 Sunderland was a British flying boat patrol bomber developed for the Royal Air Force (RAF) by Short Brothers. The Sunderland Flying Boat was one of the most powerful and widely used flying boats throughout World War II. RAF Sunderlands also saw service throughout the Korean War and continued in service until 1959.
The early 1930s saw intense competition in developing long-range flying boats for intercontinental passenger service, but the United Kingdom had no match for the new American Sikorsky S-42 flying boats, which were making headlines all over the world. Then, in 1934, Imperial Airways announced a competition between aircraft manufacturers to design and produce 28 flying boats, each weighing 18 tons and having a range of 700 miles with capacity for 24 passengers. The contract went almost directly to Short Brothers. Although Short had long built flying boats for the military and for Imperial Airways, none of them was in the class of size and sophistication requested, but the business opportunity was too great to pass up. Oswald Short, head of the company, began a fast-track program to come up with a design for a flying boat far beyond anything the company had ever built. The initial S-25 prototype first took flight in October 1937.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/72 scale model
Wing Span: 19
Length: 13.75
FBSFBTE
|
This handcrafted CF-105 Arrow 1/48 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The CF-105 Arrow was a delta-winged interceptor aircraft, designed and built by Avro Aircraft Limited (Canada). The CF-105n Arrow was considered to be both an advanced technical and aerodynamic achievement for the Canadian aviation industry, it held the promise of Mach 2 speeds at altitudes exceeding 50,000 ft, and was intended to serve as the Royal Canadian Air Force's primary interceptor in the 1960s and beyond. However, not long after the start of its flight test program, the development of the Arrow was abruptly and controversially halted before the project review had taken place.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/48 scale model
Wing Span: 12.5
Length: 19.75
FCF105T
|
This handcrafted Nieuport 28 1/20 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Nieuport 28 was a French biplane fighter aircraft flown during World War I. By the middle of 1917 it was obvious that the Nieuport 17 was unable to cope with the latest German fighters, in fact, the Nieuport was already being rapidly replaced in French service with the SPAD S.VII. The Nieuport 28 design was an attempt to adapt the concept of the lightly built, highly maneuverable rotary engined fighter typified by the Nieuport 17 to the more demanding conditions of the times. It had a more powerful engine, and a new wing structure – for the first time a Nieuport biplane was fitted with conventional two spar wings. Although very maneuverable and easy to fly, its performance turned out to be mediocre and its engine unreliable, and overall the type was not a success.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/20 scale model
Wing Span: 12.75
Length: 16
FFN28TE
|
This handcrafted Focke Wulf FW-190 1/24 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Focke Wulf FW-190 was a German World War II single-seat, single-engine fighter aircraft designed by Kurt Tank in the late 1930s. The FW-190 was used by the Luftwaffe in a wide variety of roles, including day fighter, fighter-bomber, and ground-attack aircraft. The FW-190 was well liked by its pilots. Some of the Luftwaffe's most successful fighter aces claimed a great many of their kills while flying it.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/24 scale model
Wing Span: 17.25
Length: 14.5
FGF190TE
|
This handcrafted Fokker Dr.I "Red Baron" 1/20 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Fokker Dr.I triplane was a World War I fighter aircraft, which saw widespread service in the spring of 1918. It became renowned as the aircraft in which Manfred von Richthofen gained his last 19 victories. During 1917, the Sopwith Triplane began to appear over the Western Front. The Sopwith swiftly proved itself superior to the Albatros fighters which were currently in use by the Luftstreitkräfte. Fokker-Flugzeugwerke responded by converting an unfinished biplane prototype into the V.4, a small, rotary-powered triplane with a steel tube fuselage and thick cantilever wings. Instead of submitting the V.4 for a type test, Fokker produced a revised prototype designated V.5. Richthofen first flew the Dr.I in September 1917 and shot down two enemy aircraft in two days. Richthofen recommended that fighter squadrons be reequipped with the new aircraft as soon as possible.
This specific Dr.I is painted as Manfred Albrecht Freiherr von Richthofen's plane or "Red Baron" as he was widely known. Richhofen was a German fighter pilot with the Imperial German Army Air Service (Luftstreitkräfte) during World War I. He is considered the top ace of that war, being officially credited with 80 air combat victories, more than any other pilot. Richthofen was shot down and killed near Amiens in April 1918. He remains quite possibly the most widely-known fighter pilot of all time, and has been the subject of many books and films.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
FGF3
Pre-Order! Available: March
|
This Listing is for a Set of 4 Vinyl Figures.
The Set Includes:
1x Rick Grimes.
1x Daryl Dixon.
1x Rv Walker.
1x Bicycle Girl.
|
Scale: 1/48 scale model
Wing Span: 5.5
Length: 11.25
CT38NTP
|
Scale: 1/48 scale model
Wing Span: 5.5
Length: 11.25
CT38TP
|
Scale: 1/24 scale model
Wing Span: 17.75
Length: 11.75
CT3AFT
|
Scale: 1/40 scale model
Wing Span: 9.5
Length: 13
CT50T
|
Scale: 1/100 scale model
Wing Span: 17.5
Length: 18.5
CVC137T
|
Scale: 1/100 scale model
Wing Span: 24
Length: 28
CVC25TR
|
Scale: 1/100 scale model
Wing Span: 12
Length: 14
CVC25TP
|
Scale: 1/32 scale model
Wing Span: 10.5
Length: 13.25
CX1AT
|
Scale: 1/32 scale model
Wing Span: 10.5
Length: 13.25
CX1T
|
Scale: 1/32 scale model
Wing Span: 13
Length: 16.25
CX2T
|
Scale: 1/48 scale model
Wing Span: 12.75
Length: 8.5
CX32TR
|
Scale: 1/32 scale model
Wing Span: 8.5
Length: 25.25
CX3T
|
Scale: 1/48 scale model
Wing Span: 8.25
Length: 11.25
CX45TR
|
Made exclusively for Triad's female bodies, these are heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for other bodies. The feet are made for the Asian skintone female bodies.
|
Made exclusively for Triad's ALPHA and EVA bodies, these are female heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for the EVA bodies. The feet are made for the Caucasian skintone female bodies.
|
Made exclusively for Triad's female bodies, these are heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for other bodies. The feet are made for the Hispanic skintone female bodies.
|
Our all-time best-selling clothing series are back! The Harley Chic outfit series are better than ever with an all new leather material and made with an ultra tight fit. The set comes complete with an inner shirt, full leather jacket and pants, belt, and a pair of leather shoes. Each set is tailored to fit Triad Toys' Alpha female action figure body, but will fit most 12 inch female action figures.
Harley Chic 5.0 Outfit Set Includes:
- 1 Black Leather Jacket with White Arm Stripes
- 1 Black Leather Pants with White Leg Stripes
- 1 White Cotton Knit Spandex Tank Top
- 1 Pair Black Leather Female Boots
|
Our all-time best-selling clothing series are back! The Harley Chic outfit series are better than ever with an all new leather material and made with an ultra tight fit. The set comes complete with an inner shirt, full leather jacket and pants, belt, and a pair of leather shoes. Each set is tailored to fit Triad Toys' Alpha female action figure body, but will fit most 12 inch female action figures.
Harley Chic 5.0 Outfit Set Includes:
- 1 White Leather Jacket with Black Arm Stripes
- 1 White Leather Pants with Black Leg Stripes
- 1 Black Cotton Knit Spandex Tank Top
- 1 Pair White Leather Female Boots
|
