This handcrafted CF-105 Arrow 1/48 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The CF-105 Arrow was a delta-winged interceptor aircraft, designed and built by Avro Aircraft Limited (Canada). The CF-105n Arrow was considered to be both an advanced technical and aerodynamic achievement for the Canadian aviation industry, it held the promise of Mach 2 speeds at altitudes exceeding 50,000 ft, and was intended to serve as the Royal Canadian Air Force's primary interceptor in the 1960s and beyond. However, not long after the start of its flight test program, the development of the Arrow was abruptly and controversially halted before the project review had taken place.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/48 scale model
Wing Span: 12.5
Length: 19.75
FCF105T
|
This handcrafted Nieuport 28 1/20 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Nieuport 28 was a French biplane fighter aircraft flown during World War I. By the middle of 1917 it was obvious that the Nieuport 17 was unable to cope with the latest German fighters, in fact, the Nieuport was already being rapidly replaced in French service with the SPAD S.VII. The Nieuport 28 design was an attempt to adapt the concept of the lightly built, highly maneuverable rotary engined fighter typified by the Nieuport 17 to the more demanding conditions of the times. It had a more powerful engine, and a new wing structure – for the first time a Nieuport biplane was fitted with conventional two spar wings. Although very maneuverable and easy to fly, its performance turned out to be mediocre and its engine unreliable, and overall the type was not a success.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/20 scale model
Wing Span: 12.75
Length: 16
FFN28TE
|
This handcrafted Focke Wulf FW-190 1/24 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Focke Wulf FW-190 was a German World War II single-seat, single-engine fighter aircraft designed by Kurt Tank in the late 1930s. The FW-190 was used by the Luftwaffe in a wide variety of roles, including day fighter, fighter-bomber, and ground-attack aircraft. The FW-190 was well liked by its pilots. Some of the Luftwaffe's most successful fighter aces claimed a great many of their kills while flying it.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
Scale: 1/24 scale model
Wing Span: 17.25
Length: 14.5
FGF190TE
|
This handcrafted Fokker Dr.I "Red Baron" 1/20 scale model is painstakingly built by our skilled craftsmen with a wealth of detail. The Fokker Dr.I triplane was a World War I fighter aircraft, which saw widespread service in the spring of 1918. It became renowned as the aircraft in which Manfred von Richthofen gained his last 19 victories. During 1917, the Sopwith Triplane began to appear over the Western Front. The Sopwith swiftly proved itself superior to the Albatros fighters which were currently in use by the Luftstreitkräfte. Fokker-Flugzeugwerke responded by converting an unfinished biplane prototype into the V.4, a small, rotary-powered triplane with a steel tube fuselage and thick cantilever wings. Instead of submitting the V.4 for a type test, Fokker produced a revised prototype designated V.5. Richthofen first flew the Dr.I in September 1917 and shot down two enemy aircraft in two days. Richthofen recommended that fighter squadrons be reequipped with the new aircraft as soon as possible.
This specific Dr.I is painted as Manfred Albrecht Freiherr von Richthofen's plane or "Red Baron" as he was widely known. Richhofen was a German fighter pilot with the Imperial German Army Air Service (Luftstreitkräfte) during World War I. He is considered the top ace of that war, being officially credited with 80 air combat victories, more than any other pilot. Richthofen was shot down and killed near Amiens in April 1918. He remains quite possibly the most widely-known fighter pilot of all time, and has been the subject of many books and films.
This handcrafted model is painstakingly built from Philippine mahogany by our skilled craftsmen with a wealth of detail and makes a great gift for any veteran, aviation enthusiast or history buff.
FGF3
Pre-Order! Available: November
|
This Listing is for a Set of 4 Vinyl Figures.
The Set Includes:
1x Rick Grimes.
1x Daryl Dixon.
1x Rv Walker.
1x Bicycle Girl.
|
Scale: 1/48 scale model
Wing Span: 5.5
Length: 11.25
CT38NTP
|
Scale: 1/48 scale model
Wing Span: 5.5
Length: 11.25
CT38TP
|
Scale: 1/24 scale model
Wing Span: 17.75
Length: 11.75
CT3AFT
|
Scale: 1/40 scale model
Wing Span: 9.5
Length: 13
CT50T
|
Scale: 1/100 scale model
Wing Span: 17.5
Length: 18.5
CVC137T
|
Scale: 1/100 scale model
Wing Span: 24
Length: 28
CVC25TR
|
Scale: 1/100 scale model
Wing Span: 12
Length: 14
CVC25TP
|
Scale: 1/32 scale model
Wing Span: 10.5
Length: 13.25
CX1AT
|
Scale: 1/32 scale model
Wing Span: 10.5
Length: 13.25
CX1T
|
Scale: 1/32 scale model
Wing Span: 13
Length: 16.25
CX2T
|
Scale: 1/48 scale model
Wing Span: 12.75
Length: 8.5
CX32TR
|
Scale: 1/32 scale model
Wing Span: 8.5
Length: 25.25
CX3T
|
Scale: 1/48 scale model
Wing Span: 8.25
Length: 11.25
CX45TR
|
Made exclusively for Triad's female bodies, these are heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for other bodies. The feet are made for the Asian skintone female bodies.
|
Made exclusively for Triad's ALPHA and EVA bodies, these are female heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for the EVA bodies. The feet are made for the Caucasian skintone female bodies.
|
Made exclusively for Triad's female bodies, these are heeled feet in three different sizes. The feet are made to specifically wear Triad's high heel shoes and it comes in three sizes - low, medium, and high heels. Each set comes with a pair of ankle cups for use with the ALPHA body, or without the ankle cups for other bodies. The feet are made for the Hispanic skintone female bodies.
|
Our all-time best-selling clothing series are back! The Harley Chic outfit series are better than ever with an all new leather material and made with an ultra tight fit. The set comes complete with an inner shirt, full leather jacket and pants, belt, and a pair of leather shoes. Each set is tailored to fit Triad Toys' Alpha female action figure body, but will fit most 12 inch female action figures.
Harley Chic 5.0 Outfit Set Includes:
- 1 Black Leather Jacket with White Arm Stripes
- 1 Black Leather Pants with White Leg Stripes
- 1 White Cotton Knit Spandex Tank Top
- 1 Pair Black Leather Female Boots
|
Our all-time best-selling clothing series are back! The Harley Chic outfit series are better than ever with an all new leather material and made with an ultra tight fit. The set comes complete with an inner shirt, full leather jacket and pants, belt, and a pair of leather shoes. Each set is tailored to fit Triad Toys' Alpha female action figure body, but will fit most 12 inch female action figures.
Harley Chic 5.0 Outfit Set Includes:
- 1 White Leather Jacket with Black Arm Stripes
- 1 White Leather Pants with Black Leg Stripes
- 1 Black Cotton Knit Spandex Tank Top
- 1 Pair White Leather Female Boots
|
This Listing is for Rick Grimes Vinyl Figure.
|
This Listing is for Daryl Dixon Vinyl Figure.
|
This Listing is for Rv Walker Vinyl Figure.
|
Note: Headsculpt and accressories shown only! Body is not included in this product!
|
In a quaint New England town with a history of witches and pilgrims, misunderstood eleven-year-old Norman Babcock can see and talk to ghosts. No one believes him, of course-everyone just thinks he's weird (including his parents). But when a folktale of a witch who cursed her accusers turns out to be true, it's up to Norman to save the town from pilgrim zombies! He'll also have to take on a very angry witch, an annoying sidekick, his boy-crazy teenage sister, and dozens of moronic grown-ups who get in his way. This young ghoul whisperer finds his paranormal talents pushed to their otherworldly limits in this hilarious and spooky adventure!
This Listing is for Neil.
|
In a quaint New England town with a history of witches and pilgrims, misunderstood eleven-year-old Norman Babcock can see and talk to ghosts. No one believes him, of course-everyone just thinks he's weird (including his parents). But when a folktale of a witch who cursed her accusers turns out to be true, it's up to Norman to save the town from pilgrim zombies! He'll also have to take on a very angry witch, an annoying sidekick, his boy-crazy teenage sister, and dozens of moronic grown-ups who get in his way. This young ghoul whisperer finds his paranormal talents pushed to their otherworldly limits in this hilarious and spooky adventure!
This Listing is for Zombie Amelia.
|
A KOTOBUKIYA Japanese import! It's been a little while, but Koto's amazing X-Men Danger Room Sessions Fine Art Statue series is back! The last time we visited the X-Men training facility was with the Cajun hero Gambit, but now the mutants are more formidable than ever with their leader CYCLOPS! Scott Summers was one of the original five teenaged X-Men who trained with Professor Xavier, and ever since he's led X-Men as they fight for the survival of mutants everywhere. Cyclops is so named for his monocular ruby quartz visor; he can flip it open to unleash powerful optic blasts against his opponents! Being a long-standing member of the X-Men means that Cyclops has done a lot of training in the Danger Room. Ever since the early days of Marvel Comics' mutant adventures, "X" teams have trained together in the ultra high tech facility known as the Danger Room, equipped with state of the art adaptive combat and athletics routines that challenge each participant in unique ways. The training facility has been featured prominently in X-Men comics over the years, as well as in various cartoons and the third X-Men film.
Celebrating the classic look of Scott Summers from the Jim Lee era of the early 1990s, the mutant leader and tactical genius prepares an optic blast for whatever the Danger Room can throw at him. Cyclops wears what many consider to be his coolest costume, a sleek blue bodysuit with bright yellow accessories like trunks, gloves, boots, harness, and a variety of belts. While not always the most physically imposing X-Man, "Slim" here shows that he's been working out with a powerful physique and tensed muscles. Cyclops leans forward with arms outstretched at his sides in a classic pose that means he's about to unleash a blast of massive concussive force. The mutant leader has all of the fine attention to detail you've come to know and love from the Danger Room Sessions series, especially in the nuances of his costume. Each belt and strap is individually sculpted along with pouches and "X" symbols. Cyclops has an excellent head sculpt that captures the hero's ferocious intensity as well as his windblown brown hair.
Sculpted by Erick Sosa, Cyclops stands 10 ½ inches tall in 1/6th scale with the other Danger Room Sessions members like Psylocke, Wolverine, and Colossus. Also like them, Scott Summers stands on a unique Danger Room holographic environment; this one features half of a smashed Sentinel head! No Danger Room set or Cyclops collection would be complete without this amazing Fine Art Statue.
|
