Newest Products

- Newly tooled M7 Priest Early Production q/authentic details
- Newly tooled stowage bins for Early Production
- Newly tooled glacis plate finely produced w/weld seams
- Newly tooled fighting-compartment armor w/accurate details on both faces
- Newly tooled one-piece slide-molded transmission cover w/realistic cast detail
- Newly tooled air filters
- Newly tooled vehicle tools have clasp detail
- Newly designed M2 machine gun pulpit provides full field of fire
- Brand new M2 105mm howitzer w/complete breech
- New rear-hull armor plate w/air filters
- Fully detailed brand new T41 DS tracks
- Hatch and periscope cover can be assembled open/closed
- Aluminum gun barrel w/finely reproduced rifling
- Fighting compartment w/accurate interior detail
- Floor pattern realistically produced
- Transmission w/excellent detail
- Anti-aircraft MG w/gun mount
- Detailed ammunition set included as bonus
- Intricately reproduced gun elevation system
- Fully detailed gun cradle mount w/bolt and support-brace details
- Gun breech made by slide mold
- Shield supports connected to gun also included
- Gun mount w/hand wheels finely reproduced
- Engine compartment rear panel is sharply detailed
- Detailed instrument panel
- Includes driver’s controls
- Lower hull made by 2-directional slide molds
- Bolts and rivets delicately represented on hull bottom
- Towing eyes included
- Accurately reproduced suspension
- Suspension bogies w/realistic cast detail
- Idler wheels have delicate detail

At the time of its entry into WWII, the USA relied heavily on the M3 Lee tank. Very early on it was realized there was a need for an armored and fully tracked self-propelled howitzer able to keep pace with armored formations. The resulting design, based on the M3 chassis and featuring an M2 105mm gun, was the 105mm Howitzer Motor Carriage M7. In British service it was, due to the .50-cal machine gun mounted in a prominent pulpit-like structure, called the Priest. Production of the 22.97-tonne vehicle commenced in April 1942, and a total of 2,814 M7s were eventually built. Early M7 Priests served with both the US Army and the British in North Africa and the Mediterranean. Each US armored division featured three battalions of the successful M7.

Dragon’s new 1/35 scale kit of the M7 Priest depicts an Early-Production type. It builds on the popular success of the Mid-Production kit (Item No.6637), and it features correct characteristics such as the howitzer (with an aluminum barrel featuring delicate rifling), ammunition stowage, transmission cover and M3-type bogie suspension. Among the many newly tooled parts are the side-armor plates for the hull, and new stowage bins on the rear of the hull. The interior of the main fighting compartment is particularly well done with full detail such as the 105mm M2 howitzer, stowed and ready-to-use ammunition rounds, intricate driver’s compartment and complete transmission. With the arrival of this kit, those modelers waiting for an Early-Production version of the M7 Priest will now be able to offer up a prayer of thanks!

(A) Andy Poon

The #1 arcade smash rises up from the depths, this time with tentacles.

10-Doh! Is from the So Analog line by Squid Kids Ink. The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall

Edition of 100.

(A) Jerome Lu

Remembered by some, forgotten by most. They may be dead technology, but they live on in our memories. Who needed attentive parents, a babysitter, or even friends back in the 80's. Now you can relive the good ol' days by reminiscing about all of that time well spent way back when with the three figures of the 10-Doh! line of vinyl figures from Squid Kids Ink. Get ready to jump some barrels and smash that primate with Hyperactive Monkey Kong (300 pieces, designed by Jerome Lu), discover the super sexy princess who goes bump in the night with Super Nightmare Princess (300 pieces, designed by Andrew Wilson), experience the #1 arcade smash that rises from the depths with Double Kraken (100 pieces, designed by Andy Poon), get hit below the belt by KnockOut! (300 pieces, designed by Kwestone), and see what happens when two brothers get smashed together with Super Double Ninja Battle Bros. (300 pieces, designed by Tracy Tubera). The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall.

(A) Jesse Hernandez

A UK import by RAJE Toys! Acclaimed artist Jesse Hernandez (Immortal Studios) joins the RAJE Toys collection with his long awaited release of his Mecha Azteca vinyl figure. This 12" figure, sculpted with great attention to detail by Jim Freckingham, combines Japanese, American and indigenous design sensibilities in a hulking beast of a figure. Created in a limited edition of 900 pieces, fans can choose from the Shadow edition, the classic Red version, or the super-limited Jungle version. No guarantee of color on Shadow or Red version

DC COMICS

SCULPTED BY DAVE CORTES
Before the blockbuster The Dark Knight Rises hits theaters July 20, be sure to pick up these 1:12 scale statues straight from the streets of Gotham City. Featuring Batman and two of his most notorious enemies, Bane and Catwoman, these scene-stealing collectibles are sure to fly off the shelves! These hand-painted, cold-cast porcelain statues are packaged in a 4-color box. *Allocations May Occur
* Batman: 6" h

DC COMICS

SCULPTED BY DAVE CORTES
Before the blockbuster The Dark Knight Rises hits theaters July 20, be sure to pick up these 1:12 scale statues straight from the streets of Gotham City. Featuring Batman and two of his most notorious enemies, Bane and Catwoman, these scene-stealing collectibles are sure to fly off the shelves! These hand-painted, cold-cast porcelain statues are packaged in a 4-color box.
* Catwoman: 7" h

* 6" tall and made of vinyl
* ABS and cloth
* Jacket with integrated hoodie
* sM4 with removable supressor and sniper scope
* sMK23 with removable supressor
* 2.0 articulated and 'classic' arms and a removable helmet

This Listing is for 1/6 Henry Kano 442nd Infantry Regiment Italy 1943.

Detailed electronic "intergalactic" Republic Attack Shuttle vehicle converts to armored attack base mode for twice the battle excitement!
Armored attack base mode features pop-up missile-firing cannons, missile firing launchers, a canopy that opens and electronic lights, sounds and phrases.
Vehicle comes with 5 projectiles, unique Clone Pilot figure, blaster, label sheet and instructions, Galactic Battle Game dueling card, battle game base and game die.
In space or on the ground, the Republic Attack Shuttle demolishes the droid army. In attack ship mode, this heavily armed vehicle pummels the enemy with laser cannon fire. It lands in the center of the battle and converts to an armored attack base with a recon fighter. Clone trooper forces operate the attack ship and armored base, using this powerful weapon to bring the battle right to the droid army!
Prepare for twice the out-of-this-world battle action! This detailed Republic Attack Shuttle vehicle features rotating wings to start it "soaring." Put your Clone Pilot figure in the cockpit and then detach it to create a recon fighter vehicle! If an attack begins and you've got to arm yourself for battle, convert your vehicle to armored attack base mode. Electronic lights flash as the base makes announcements like "Droid fighters — incoming!" and "All cannons fire" to prepare you and your Clone Pilot figure. Get your enemies in your sights and then engage your pop-up missile-firing cannons! None of your opponents have a chance against you and this dual-mode dynamo!

Vehicle comes with 5 projectiles, Clone Pilot figure, blaster, label sheet, instructions, Galactic Battle Game dueling card, battle game base and game die.

Fifty years ago Topps unleashed Mars Attacks on an unsuspecting card buying public. The lurid cards, which depicted an invasion of Earth by Martians in the style of the B-movies of the time, proved popular and have spawned merchandising, comic books, and a movie. This 6" tall action figure from Mezco recreates the hypercephalic invader, complete with his space helmet and ray gun. Blister card packaging.

Seen in the epic movie trilogy The Lord of the Rings, the swords of Middle-Earth are recreated by the artisans of Museum Replicas for collectors, LARP, and other forms of action play. Wielded by Aragorn, Anduril was the powerful and mythical blade forged from the shards of Narsil. Forged in Gondolin during the First Age for the Elvish High King Turgon, Glamdring was wielded by Gandalf during the War of the Ring. Also forged in Gondolin in the First Age, the Elvish short sword Sting came into the possession of Bilbo Baggins and was carried by his cousin Frodo Baggins on his mission to Mount Doom. The Uruk-Hai Sword is wicked looking blade is a menacing and dangerous weapon on any battlefield. These beautiful replicas are made of high-quality latex with a carbon fiber core for strength. These are quality latex weapons for LARP and other forms of action play. The tough layered foam, high quality latex, and the specially developed paint have been researched for long lasting play and a non-cracking finish.

Seen in the epic movie trilogy The Lord of the Rings, the swords of Middle-Earth are recreated by the artisans of Museum Replicas for collectors, LARP, and other forms of action play. Wielded by Aragorn, Anduril was the powerful and mythical blade forged from the shards of Narsil. Forged in Gondolin during the First Age for the Elvish High King Turgon, Glamdring was wielded by Gandalf during the War of the Ring. Also forged in Gondolin in the First Age, the Elvish short sword Sting came into the possession of Bilbo Baggins and was carried by his cousin Frodo Baggins on his mission to Mount Doom. The Uruk-Hai Sword is wicked looking blade is a menacing and dangerous weapon on any battlefield. These beautiful replicas are made of high-quality latex with a carbon fiber core for strength. These are quality latex weapons for LARP and other forms of action play. The tough layered foam, high quality latex, and the specially developed paint have been researched for long lasting play and a non-cracking finish.

(A) Kwestone

Way sexier than her predecessor, KnockOut! is ready to hit below the belt. Who needed attentive parents, a babysitter, or even friends back in the 80's? Now you can relive the good ol' days by reminiscing about all of that time well spent way back when.

10-Doh! Is the first figure from the So Analog line by Squid Kids Ink. The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall

Edition of 300.

Jump into the Clone Wars with these thrilling action figures!
Each figure comes packaged with a fun game piece!
Case of 12 exciting 3 3/4-inch Star Wars action figures in an animated style.
Articulated wrists, removable helmets, and more!
Star Wars returns to television, and this exciting collection brings back some old favorites, as well as a number of new faces… in a big fun way! These 3 3/4-inch scale plastic action figures include terrific accessories and fun details, and each figure comes with a Galactic Battle Game card and stand. You'll find such distinguishing touches as articulated wrists, removable helmets, and much more. Jump into the Clone Wars by adding these to your order now! Ages 4 and up.
This Wave 2 case includes 12 individually packaged action figures (subject to change):
1x Republic Commando Boss
1x Anakin Skywalker
1x Clone Trooper (Phase II)
1x Captain Rex (New Helmet)
1x Obi-Wan Kenobi
1x Commander Cody (Flight Pack)
1x Plo Koon
1x Aqua Battle Droid
1x Savage Opress
1x Cad Bane
1x Yoda
1x Aayla Secura