1/6 "Hanno Lantzman" (Untersturmführer) - Totenkopf Panzergrenadier Officer, Panzergrenadier-Regiment 6 "Theodor Eicke", Warsaw Front 1944
|
Uniform: - M38 Helmet - Fallschirmjager Helmet Scrim Netting - Neck Scarf - Fallschirmjager Jump Smock - Fallschirmjager Trousers - 1940 Fliegerbluse (Gefreiter) - Fallschirmjager Boots (front-laced)
Equipment: - M31 Breadbag - FG 42 Bandolier - Luftwaffe Belt - M31 Mess Kit - S84/98 Bayonet Scabbard - M31 Water Bottle
Insignia: - Luftwaffe Chest Eagle - Collar Patch - Shoulder Tabs
Weapon: - FG 42 Rifle (Late Type) - FG 42 Magazine x 2 - S84/98 Bayonet
Others: - NEO 3 Body - Men Hands - Character Head - NEW! - Clear Stand Mount
|
Factory Sealed Case of 8: Alistair Overeem (w/ Pride Gloves); Chael Sonnen; Anthony Pettis; Lyoto Machida; Anderson Silva (Championship Edition w/ belt) X2; Dominick Cruz (Championship Edition w/ belt); Mark Coleman (w/ Pride Gloves).
ALL FACTORY SEALED CASES ARE SHIPPED DOUBLE BOXED
|
Complete Set of 8: Alistair Overeem; Chael Sonnen; Anthony Pettis; Lyoto Machida; Anderson Silva (Championship Edition w/ belt); Dominick Cruz (Championship Edition w/ belt); Alistair Overeem (w/ Pride Gloves); Mark Coleman (w/ Pride Gloves).
|
- Intricate British Welbike
- Authentic-looking fuel tanks
- Folding handlebars twist into position
- Realistic saddle can be adjusted to different heights
- Chainring attached to rear
- Delicately detailed 2-stroke engine
- Wheels produced w/detailed tire tread
WWII produced some novel weapon and vehicle designs, and one of the more unusual was certainly the British Welbike. This miniature motorcycle, the smallest ever employed by the British military, was designed for use by clandestine members of the Special Operations Executive (SOE). A total of 3,641 Welbikes were manufactured by the Excelsior Motor Company from 1942-45. An air-cooled Villiers 98cc engine powered the machine to a top speed of 48km/h although this must have been bumpy since it possessed no suspension and there was only a rear brake! It weighed a mere 32kg (minus its 3.7-liter load of fuel that offered a 144km range) and it could fit inside a parachute airdrop container. In the end, the SOE didn’t use the Welbike much, but it did become popular with paratroopers of the 1st and 6th Airborne Divisions. The Welbike was thus used in such airborne operations as Market Garden in Arnhem, but commandoes also used them in landings at Anzio and Normandy.
Dragon has produced a superb 1/6 scale version of the Welbike. Just like the full-size motorcycle, the handlebars twist into position before the machine’s ridden off into battle. On the original Welbike the time taken from recovery from an airborne drop to being ridden away was supposed to take just 11 seconds! Every detail of the unique machine is recreated beautifully, right down to accurate tire tread patterns, the spoked wheels and the two-stroke engine. The handlebars are steerable, and the saddle has a fully functioning height adjustment. Thus this model Welbike can be readily adapted to a vignette featuring a suitable British paratrooper or commando from the Dragon 1/6 Action Figure range. This model Welbike is well done indeed!
Figure not included
|
Features:
Clips to your book to help you read in the dark
Adjustable neck
Bright LED bulb
Requires 2 x CR2025 button cells [included]
Magic UV Pen
Pre-Order! Available: June
Upc: 502409521703-2
|
Ammo link and machine gun not included, Working Light
|
The figure is decked out with an authentic tattoo, and it includes a vest with the iconic "DDP" logo on the back and matching logos on his legs.
In 1997, Diamond Dallas Page developed an intense rivalry against “Macho Man” Randy Savage and his faction, the New World Order (nWo), after he rejected an offer to join their ranks. At Spring Stampede 1997, Page faced Savage in a No Disqualification Match. After “Macho Man” knocked out the referee and performed his signature flying elbow on Page, nWo referee Nick Patrick entered to deliver the 3-count needed for victory. But when Savage picked up his seemingly fatigued opponent, Page dropped Savage with his vaunted Diamond Cutter, forcing Patrick to make the 3-count and give DDP the victory.
|
IDEA & DESIGN WORKS LLC
(W) Steven Grant, Larry Hama (A) Geoff Isherwood, Mike Vosburg (CA) J. Scott Campbell
(W) Larry Hama, Steven Grant (A) Mike Vosburg, Geof Isherwood, Steve Leialoha, Russ Heath, Frank Springer, Marie Severin
The original adventures of America's elite special-missions force continue with the recruitment of Roadblock and Duke; the emergence of the enigmatic ninja known as Storm Shadow; and the debut of the duplicitous Zartan, master of disguise!
|
PUBLISHERS GROUP WEST
(W) Kathryn Leigh Scott, Jim Pierson
Dark Shadows: Return to Collinwood presents a look back at four decades of the successful spooky soap opera that made sympathetic vampire Barnabas Collins a pop culture phenomenon and prompted the big-screen revival starring Johnny Depp and directed by Tim Burton. The large format book includes color photographs and behind-the-scenes anecdotes from Kathryn Leigh Scott and three other original cast members. With the ongoing fascination for all things vampiric, this book about the making of the new film and the history of the original series will be an enticing volume for new and old fans alike.
|
- Newly tooled M7 Priest Early Production q/authentic details
- Newly tooled stowage bins for Early Production
- Newly tooled glacis plate finely produced w/weld seams
- Newly tooled fighting-compartment armor w/accurate details on both faces
- Newly tooled one-piece slide-molded transmission cover w/realistic cast detail
- Newly tooled air filters
- Newly tooled vehicle tools have clasp detail
- Newly designed M2 machine gun pulpit provides full field of fire
- Brand new M2 105mm howitzer w/complete breech
- New rear-hull armor plate w/air filters
- Fully detailed brand new T41 DS tracks
- Hatch and periscope cover can be assembled open/closed
- Aluminum gun barrel w/finely reproduced rifling
- Fighting compartment w/accurate interior detail
- Floor pattern realistically produced
- Transmission w/excellent detail
- Anti-aircraft MG w/gun mount
- Detailed ammunition set included as bonus
- Intricately reproduced gun elevation system
- Fully detailed gun cradle mount w/bolt and support-brace details
- Gun breech made by slide mold
- Shield supports connected to gun also included
- Gun mount w/hand wheels finely reproduced
- Engine compartment rear panel is sharply detailed
- Detailed instrument panel
- Includes driver’s controls
- Lower hull made by 2-directional slide molds
- Bolts and rivets delicately represented on hull bottom
- Towing eyes included
- Accurately reproduced suspension
- Suspension bogies w/realistic cast detail
- Idler wheels have delicate detail
At the time of its entry into WWII, the USA relied heavily on the M3 Lee tank. Very early on it was realized there was a need for an armored and fully tracked self-propelled howitzer able to keep pace with armored formations. The resulting design, based on the M3 chassis and featuring an M2 105mm gun, was the 105mm Howitzer Motor Carriage M7. In British service it was, due to the .50-cal machine gun mounted in a prominent pulpit-like structure, called the Priest. Production of the 22.97-tonne vehicle commenced in April 1942, and a total of 2,814 M7s were eventually built. Early M7 Priests served with both the US Army and the British in North Africa and the Mediterranean. Each US armored division featured three battalions of the successful M7.
Dragon’s new 1/35 scale kit of the M7 Priest depicts an Early-Production type. It builds on the popular success of the Mid-Production kit (Item No.6637), and it features correct characteristics such as the howitzer (with an aluminum barrel featuring delicate rifling), ammunition stowage, transmission cover and M3-type bogie suspension. Among the many newly tooled parts are the side-armor plates for the hull, and new stowage bins on the rear of the hull. The interior of the main fighting compartment is particularly well done with full detail such as the 105mm M2 howitzer, stowed and ready-to-use ammunition rounds, intricate driver’s compartment and complete transmission. With the arrival of this kit, those modelers waiting for an Early-Production version of the M7 Priest will now be able to offer up a prayer of thanks!
Pre-Order! Available: June
|
The Clone Trooper 12 inch Figure features: Fully articulated male body (armored body) with 30+ points of articulation Bodysuit Fully detailed armor set with helmet Clone Trooper Carbine Blaster Clone Trooper Long Rifle 12-inch Figure Display Base with Star Wars Logo
|
(A) Andy Poon
The #1 arcade smash rises up from the depths, this time with tentacles.
10-Doh! Is from the So Analog line by Squid Kids Ink. The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall
Edition of 100.
Pre-Order! Available: June
|
(A) Andrew Wilson
What goes bump in the night? A super sexy princess, that's what.
10-Doh! Is from the So Analog line by Squid Kids Ink. The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall
Edition of 300.
Pre-Order! Available: June
|
(A) Jerome Lu
Remembered by some, forgotten by most. They may be dead technology, but they live on in our memories. Who needed attentive parents, a babysitter, or even friends back in the 80's. Now you can relive the good ol' days by reminiscing about all of that time well spent way back when with the three figures of the 10-Doh! line of vinyl figures from Squid Kids Ink. Get ready to jump some barrels and smash that primate with Hyperactive Monkey Kong (300 pieces, designed by Jerome Lu), discover the super sexy princess who goes bump in the night with Super Nightmare Princess (300 pieces, designed by Andrew Wilson), experience the #1 arcade smash that rises from the depths with Double Kraken (100 pieces, designed by Andy Poon), get hit below the belt by KnockOut! (300 pieces, designed by Kwestone), and see what happens when two brothers get smashed together with Super Double Ninja Battle Bros. (300 pieces, designed by Tracy Tubera). The body is made of ABS with the hands and feet are made of PVC. Each 10-Doh! figure stands 7" tall.
Pre-Order! Available: June
|
