Snake Eye's hexagram symbol is featured on this black t-shirt!
Upc: 693272969177
|
Snake Eye's hexagram symbol is featured on this black t-shirt!
Upc: 693272969160
|
Let the heroes from the pages of Marvel Comics keep your money safe from evil-doers with Monogram's impressive bust banks! Spider-Man has the proportional strength and agility of a spider which makes him the perfect candidate to protect your money! Spider-Man's black costume is also recreated as a bust bank, as is the fearsome villain Venom!
Upc: 077764670008
|
Conveniently sized at 3 ½" x 8 ½" x 8 ½", you can display your favorite DC Heroes just about anywhere. Made from roto-cast plastic, these bust banks of Superman and Wonder Woman will protect your loose change, and not get too heavy when you fill them up!
Upc: 077764440229
|
The fearsome villain of the hit film, Spider-Man 3, is the perfect protector of your loose change! This Venom Bust Bank features the likeness of the symbiotic villain from the film, with a highly-detailed sculpt that shows the alien ready to strike. Conveniently sized at 7 1/2" x 6" x 7", the bank can be placed anywhere, from your desk to a shelf as a display. Made of roto plastic, this bank will not become too heavy to carry once filled with change.
Upc: 077764675652
|
In Third Age of Middle-earth, Thorin Oakenshield and his Company
of Dwarves came upon a troll lair in Rhûdaur. There Thorin found
an ancient Elven sword named Orcrist, forged by the high Elves of
the West, in Gondolin. Thorin claimed Orcrist for his own and vowed
to cleave Goblins with it once again. He wielded the sword through
most of the Quest for Erebor, using it against the Goblins of the
Misty Mountains. The Goblins called it “Biter” and hated and feared it.
The blade of Orcrist features a curved leaf shape on one side, and a
straight edge on the other, a fitting design for a blade meant to cleave
Orcs and Goblins. Adorning the pommel is an emblem of the heraldry of
Ecthelion of the Fountain. The hilt is shaped from the tooth of a dragon.
It is unknown if the tooth was acquired prior to the fifth battle of
the First Age, or added to the sword with the inscription in the millennia
after the Fall of Gondolin, most likely by the Dwarves of the North.
Inscriptions on the sword in Elven runes:
On the guard is the name Orcrist “Goblin-cleaver”.
Blade Inscription (both sides): “The serpent’s tooth”.
This authentically detailed replica is a reproduction of the actual
filming prop built by Weta Workshop of New Zealand and used in
the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United
Cutlery, industry leader in fine movie reproductions, has meticulously
recreated the prop using only the finest grade materials and
craftsmanship. Close attention to detail was a top priority. The
sword is 38 3/4” long and features a stainless steel blade with
an etched runic inscription. The hilt is crafted with solid
metal parts, simulated gem stones, and an acrylic resin grip
cast from the original prop. It is presented with a wood wall display and includes a certificate of authenticity.
Pre-Order! Available: July
|
In the Third Age of Middle-earth, the Hobbit Bilbo Baggins
was unexpectedly swept into an epic quest to reclaim the lost
Dwarf Kingdom of Erebor, which was long ago conquered by
the dragon Smaug. Approached out of the blue by the wizard
Gandalf the Grey, Bilbo found himself joining a company of thirteen
dwarves led by the legendary warrior, Thorin Oakenshield.
In this harrowing journey Bilbo and his Company of Dwarves came
upon a troll lair in Rhûdaur. There they found two Elven swords,
Glamdring, and Orcrist, and a knife. Bilbo claimed the knife for himself,
and it was more of a sword to someone of his stature. He
wielded the sword on his journey into the Wild, through treacherous
lands swarming with Goblins and Orcs, deadly Wargs, and Sorcerers.
This authentically detailed replica is a reproduction of the actual
filming prop. The Sting sword is 22 ½” overall, featuring
a stainless steel blade and, solid metal hilt parts, and an intricately
detailed vine adorning the grip. It is presented with a
wood wall display featuring graphic motifs from The Hobbit: An
Unexpected Journey , and includes a certificate of authenticity.
Pre-Order! Available: July
|
The Sting Sword Scabbard features a leather wrapping,solid metal fittings,and a leather belt strap.It is designed to fit all officially licensed versions of the Sting sword from United CutleryThe sting sword is sold separately .Length:18 3/4 ".
Pre-Order! Available: July
|
One of the most powerful Wizards in all of Middle-earth,
Gandalf the Grey joins the quest to reclaim the Dwarf
Kingdom of Erebor and the great treasure that lies within
its stone halls from a fire breathing dragon, Smaug the
Terrible. Gandalf’s staff appears to be a natural piece of
wood, but the crown of the shaft holds something supernatural.
Within the crown, the wood has grown around
a hollow, white lattice-shaped bulb. The lattice is vaguely
Elven in design, and holds a great power. At Gandalf’s
command, he can cause the crown to illuminate and
light his way at night, or to spark a blue flame to ignite
fire. The staff is also imbued with a great strength,
allowing Gandalf to shatter stone with one strike.
This authentically detailed replica is a reproduction casting
of the actual filming prop built by the production Art
Department in New Zealand and used in the motion picture,
THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery, industry
leader in fine movie reproductions, has meticulously
recreated the prop using only the finest grade materials
and craftsmanship. Close attention to coloring and detail
was a top priority. The Staff is 73” overall, featuring finely
cast details and authentic hand painted coloring. It is presented
with an Elven styled wall display featuring Gandalf’s
“G” rune, and includes a certificate of authenticity.
|
There they found two ancient Elven swords and a knife. The exact
history of these blades is not certain, but when the Elf lord Elrond
examined them in Rivendell he determined they were well-known and
ancient blades used in the Goblin Wars to slay many Orcs in the First
Age. The sword named Glamdring was forged by the high Elves of
the West, in the hidden city of Gondolin. Glamdring survived, only
to be found thousands of years later by Gandalf and his companions.
Glamdring is an exquisite example of the height of Elven swordcraft,
and a weapon befitting an Elven king. Gandalf claimed Glamdring
for his own and wielded the sword through the Quest for
Erebor, using it against the Goblins of the Misty Mountains, and
later on the quest to destroy the One Ring. The great sword remained
at Gandalf’s side until the end of his days in Middle-earth.
This authentically detailed replica is a reproduction of the actual filming
prop built by Weta Workshop of New Zealand and used in the motion
picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery,
industry leader in fine movie reproductions, has meticulously recreated
the prop using only the finest grade materials and craftsmanship.
Close attention to detail was a top priority. The Glamdring sword is 47
5/8”(120.9cm) overall, featuring a stainless steel blade, solid metal hilt
parts, faux blue jewel inlays, and a genuine leather-wrapped grip.
It is presented with a wood wall display and includes a
certificate of authenticity
Pre-Order! Available: July
|
A Diamond Select Release! Designed and Sculpted by Art Asylum! The Walking Dead comic book has reached its landmark 100th issue, and Diamond Select Toys is celebrating with a two-pack of Walking Dead Minimates! Winter-Coat Dale and a Female Zombie , in honor of the long-running. Each Minimate stands 2 inches tall with 14 points of articulation and a variety of removable and interchangeable parts and accesories.
|
Just like they were when you were a kid, only BIGGER! Gentle Giant continues on with their new line of vintage Star Wars Action figure reproductions with the release of this classic Power Droid!!
Digitally scanned from mint 3 3/4” Kenner originals and reproduced to a substantial 7 1/2” tall. Nothing has been overlooked. Roto and injection molded and made of durable plastics, this jumbo figure is fully articulated with “clicking” leg movement faithfully reproduced to be just like the original.
That’s not all, this classic Kenner creation comes packaged on a 1977, Star Wars inspired blister card, featuring original front and “21 back” artwork, in a re-sealable plastic outer clam shell to help protect and display!
|
THE EMERALD ARCHER!
The Green Arrow aims for the heart of injustice in this new action figure straight from the pages of DC Comics-The New 52! But does a renegade like Oliver Queen really belong with the Justice League? Either way - he DOES belong on your shelf!
|
Sculpted by Jack Mathews
"You get what anybody gets. You get a lifetime."
The Cover Girls line of collectibles statues celebrates Vertigo with this beautiful statue of Death, inspired by the Sandman graphic novels. This is the first time that a Vertigo character has ever graced the Cover Girls line, so order now because, as Death herself would tell you, you only live once!
Measuring approximately 11.5" high x 4.75" wide x 5" deep, his hand-painted, cold-cast porcelain statue is packaged in a 4-color box.
|
Sculpted by TIM BRUCKNER
Superman takes flight in this all-new statue from DC Collectibles! Inspired by Frank Miller's legendary graphic novel BATMAN: THE DARK KNIGHT RETURNS, this government sanctioned Superman has a little different outlook on the American Way. Order now before it's too late!
Measuring approximately 9.75" high x 8.5" wide x 3.75" deep, his hand-painted, cold-cast porcelain statue is packaged in a 4-color box.
|
Sculpted by JAMES SHOOP
Booster Gold brings his own brand of heroism to Justice League International! Straight from DC Comics-The New 52, Booster comes equipped with his Legion Flight Ring, hurry to get yours now - these busts are sure to fly off the shelves!
Measuring approximately 6" high x 3.5" wide x 5.5" deep, his hand-painted, cold-cast porcelain statue is packaged in a 4-color box.
|
IMAGE COMICS
(W) Robert Kirkman (A/CA) Charlie Adlard, Cliff Rathburn
This deluxe hardcover features 24 issues of the hit series, The Walking Dead, along with the covers for the issues all in one massive, oversized slip-cased volume. Perfect for long-time fans, new readers, and anyone needing a heavy object with which to fend off the walking dead!
Collects THE WALKING DEAD 73-96
|
For Sparta! Now you can bring home King Leonidas' majestic cape! This life-size cape replica is a must-have prop replica from the spring's blockbuster film, 300! It is highly detailed and movie accurate. Does not include stand.
Its one size fits most
|
Sy Snootles was a Pa'lowick singer, and was also the lead vocalist for the Max Rebo Band while they were playing for Jabba the Hutt. She witnessed the downfall of Jabba firsthand, and is one of the few survivors of the ill-fated attempted execution of Luke Skywalker at the Pit of Carkoon.
Reunite the Max Rebo Band in your own collection, starting with the Sy Snootles Mini Bust! Hand crafted by the master artisans at Gentle Giant Ltd., the Sy Snootles Mini Bust is a faithful recreation of the original character down to the smallest features. No other collectable in the galaxy can claim the same level of detail. Rendered in high-quality polystone and hand painted, each of these limited edition mini busts are individually numbered and come with a matching certificate of authenticity.
|
First seen on screen at the Battle of Hoth, the feared AT-AT is the primary assault vehicle of the Galactic Empire for large-scale ground warfare. Tasked with destroying the Rebel’s shield generator, the Imperial AT-AT Walkers completed their objective with ruthless efficiency, laying waste to many Rebel soldiers, vehicles, and installations in the process.
Bring home the terrifying metal behemoths of The Empire Strikes Back! Cast in high quality polystone and then hand painted, each bookend is numbered and comes complete with a matching limited edition certificate of authenticity. Whether they’re holding up an assortment of media or on display proudly by themselves, these collectible bookends are sure to add enjoyment to any home or office.
|
In the mid-sixties, there were two attempts to build an "Indianapolis of the West", a motor speedway that would take all of the great features of Indy and expand on them in a way that would accommodate races by all four dominant racing sanctioning bodies at that time: USAC & NASCAR for oval races, NHRA for drag races and FIA for road courses. Without the help of David Lockton, this dream would have never come true. The opening race took place in August 1970 with the promise of bringing celebrities to the track, in fact, the first race was a Celebrity Pro-Am race featuring many stars from the entertainment industry with pro race winning drivers.
|
•It’s Castle Grayskull®!
•Ideally, the set will include everything shown in the “B sheet” product drawings to the left, but please remember these are working drawings and aren’t final yet.
•If produced, this will be the largest, most ambitious MOTUC item ever made – the dimensions are expected to be somewhere around 25”h x 26”w x 28”d (subject to change).
•The overall sculpt will be based on the original 1981 prototype, with the addition of an extra battle ledge, elongated jaw/face, a removable minaret on top of the dome and more!
•Just like the vintage toy, it will be a two-sided foldout but there will be three levels to show off your MOTUC figures (in scale with most of our 6.5” figures). The vintage set only had two levels, but we’ve added another across the top for maximum display options.
•Two secret doors – the first, a traditional door that opens out the back, and the second one, a secret brick wall that exits to the outside ledge.
•Trap door leading to the dungeon (of course) that has an opening door, plus “locks” and chains to hold one figure.
•Throne fits most 6.5” MOTUC figures – who will rule your Castle Grayskull®?
•Bat wing jet pack and training device were both cut from the vintage prototype and finally get a chance at production!
•Working elevator like the ‘81 prototype had, but we’ve added back the red skull on top that was cut. The elevator goes to all three levels, not just two levels like vintage toy.
•Real opening Jawbridge just like you remember, only cooler!
•Have Wind Raider? The playset will include an attachment so you can be ready for air-battle at a moment’s notice (and create a complete diorama).
•Secret Orb room is hidden inside the dome.
•Removable ladder to the roof leads to a blaster and the flag of Castle Grayskull®.
•Carrying handle is optional for easy transport or clean display.
•Did we mention… it’s Castle Grayskull®!
|
One of Spider-Man’s most dangerous foes, the maniacal Venom will stop at nothing to see Spidey crushed beneath his feet!
The Venom bookend can be paired with any other Marvel bookend, either as a unique display or to support your collection of DVDs, Books, reference guides or other media. Made using only the best polystone, no detail was overlooked. This strictly limited edition collectible comes hand numbered, complete with a matching certificate of authenticity.
|
The Walking Dead is an American post-apocalyptic drama television series developed for television by Frank Darabont. It is based on the comic book series The Walking Dead by Robert Kirkman, Tony Moore, and Charlie Adlard.
It’s a trip down memory lane… but with zombies! No longer constrained to the traditional green vs. tan, now kids and kids-at-heart alike can have their armies take on The Walking Dead! Use your green troops strategically to defend the last outposts of humanity, or take control of a horde of Walkers and decimate everything in your path in your never-ending lust to devour the living! With 10 figures per bag, featuring an assortment of different dynamic sculpts in two nightmarish colors, The Walking Dead Zombie Army Men are ready to rip, tear and chew their way into your toy collection. Purchase as many sets as you like!
|
Before the King returned. Before the Battle of Helm’s Deep. Before the Council of Elrond. Before even great Smaug fell… there was a knock at the door of Bag End that started it all. One of the most powerful wizards of Middle Earth, Gandalf’s sudden appearance one morning changes the life of Bilbo Baggins forever. Dragging his poor friend kicking and screaming into a life of adventure, Gandalf not only helps Bilbo realize his own destiny, but inadvertently puts the feared Ring of Power back into play as well.
Straight from the silver screen to your shelf, we are proud to bring you the Gandalf Mini Bust! Hand crafted by the master artisans at Gentle Giant, no detail has been overlooked in the sculpting of this piece. Using photo reference and style guides straight from the set, the Gandalf Mini Bust is as screen-accurate as you can get. Rendered in high-quality polystone and hand painted, each of these limited edition mini busts are individually numbered and come with a matching certificate of authenticity.
|
This Listing is for Little Sister.
Upc: 634482 44797-0
|
From Terminator 2: Judgment Day comes this exciting new licensed prop replica - the Endoskeleton Arm! This was first seen in the Cyberdyne break in scenes being recovered by John Connor, along with the Terminator Brain Chip.
This 1:1 scale replica was molded from an original screen used Endoskeleton arm, with the arm measuring 24" tall. The Endoarm has been recreated using a variety of materials, including polystone, fiberglass, and metal, and is triple chrome plated so it is cold to the touch for a real metal feel. The base incorporates built-in blue LED uplighting for enhanced display options, and the piece comes complete with a clear acrylic cover - as it is first seen in the movie!
This is a must have for all Terminator fans and collectors!
Limited to just 500 individually numbered pieces worldwide.
|
In celebration of Disney's highly anticipated 3D adventure film Pirates of the Caribbean: On Stranger Tides, Sideshow Collectibles and Hot Toys are proud to present the 1/6th scale Captain Jack Sparrow from Hot Toys' DX Series. Complete with two interchangeable, highly detailed portraits, a generous assortment of interchangeable hands, and a sophisticated costume and accessory set, the Captain Jack Sparrow 12-inch Figure is a must-have for any Disney or Pirates of the Caribbean fan.
The Captain Jack Sparrow - DX Series 12 inch Figure features:
•Authentic and detailed likeness of Johnny Depp as Captain Jack Sparrow in the Pirates of the Caribbean: On Stranger Tides movie
•Stands approximately 30 cm tall
•TrueType body with over 30 points of articulation
•Individually sculpted hair pieces with accessories and red hair band
•Two (2) interchangeable portraits with realistic beard and plaits on chin
•Parallel Eyeball Rolling System (PERS) patented by Hot Toys Limited
•Nine (9) pieces of interchangeable hands with rings and glove on right side including:
•One (1) pair relaxed
•One (1) pair for holding flintlock pistol
•One (1) right hand for holding saber
•One (1) pair for holding rudder or telescope
•One (1) pair showing his iconic gesture
•One (1) faux-leather detachable brown hat
•One (1) cream-colored long-sleeved shirt
•One (1) blue and brown patterned vest
•One (1) dark brown long jacket
•One (1) pair of dark brown pants
•One (1) dark brown and (1) light brown faux-leather with buckle
•One (1) dark brown faux-leather patterned shoulder band with saber sheath
•One (1) pair of brown boots
•Two (2) flintlock pistols
•One (1) saber
•One (1) left lace wristband and one (1) right wrist band
•One (1) scarf
•One (1) piece of feather on waist
•One (1) compass
•One (1) small telescope
•One (1) head sculpt of his mother
•One (1) duck's foot sculpture
•One (1) movie-accurate rudder with base and movie nameplate
•Figure stand with Captain Jack Sparrow nameplate and the movie logo
|
Darth Vader - Just the mention of his name conjured up fear not only amongst the Rebel Alliance, but within his Emperor's own Galactic Empire, as well! The Dark Lord of the Sith is considered by many to be THE villain of an entire generation. In fact, he is listed at #3 in the American Film Institute's top movie villains of all time. He is only preceded by Dr. Hannibal Lechter in 1991's The Silence of the Lambs (#1), Norman Bates in Alfred Hitchcock's classic 1960's Psycho (#2) and listed just above the Wicked Witch of the West from 1939's The Wizard of Oz.
His powerful, sinister persona was not only achieved by David Prowse's large and commanding stature and James Earl Jones resounding voice, but his fearsome helmet, as well. Whenever we think of Star Wars, the first image that comes to mind is Darth Vader and, vice versa!
The original iconic Darth Vader helmet, as seen in Star Wars Episode IV: A New Hope, was sculpted by Brian Muir based on the concept sketches by beloved illustrator Ralph McQuarrie. Even though there were 3 known castings made from the mold made from Muir's sculpt, only 1 helmet was used in the entire filming of A New Hope.
Our master pattern was cast from vintage molds in the Lucasfilm archives which are believed to have been made by none other than Rick Baker from the screen used Vader helmet back in 1977. What makes this a very special product is that the master pattern is NOT made from a digital scan, it is an actual, original casting. This means that this replica helmet will have direct lineage to the original and be as true to the actual filming prop as you can possibly get!
This helmet has the asymmetric geometry that many feel capture the true evil essence of Darth Vader. The face mask will have the screen accurate two-toned black and gunmetal sprayed paint scheme. The dents and scratches that were in the original mold have been filled in or removed, giving the helmet a more pristine appearance but still remaining faithful to the original filming prop.
With this officially licensed Darth Vader Helmet, you will feel the seductive power of the darkside! This helmet will arguably be the most important piece of any Star Wars collection.
*Edition size limited to 1000 pieces worldwide
*Constructed in Fiberglass, aluminum and plastic
*Master pattern cast from Rick Baker's original molds of an original ANH helmet
*Asymmetric geometry
*Screen accurate two-toned black and gunmetal paint scheme on face mask
*Machined aluminum tusks and metal chin/mouth grills
*Accurate lenses
*Fully lined face mask w/adjustable straps
*Full size eFX display base
*Numbered metal plaque
*Certificate of Authenticty
|
From one of the best selling and most successful games in the Valve library - comes this collection of detailed action figures faithful to the animated look of the characters.
The figures stand over 6.5" tall and feature over 25 points of articulation and include their signature in game weapons and accessories. Pyro and Demoman are the first 2 characters in this new collection and include flamethrower and grenade launchers respectively.
Each figure will include a special in-game code that customers can use to unlock special in-game bonuses when they play!
This Listing is for Demoman.
Upc: 634482 45056-7
|
From one of the best selling and most successful games in the Valve library - comes this collection of detailed action figures faithful to the animated look of the characters.
The figures stand over 6.5" tall and feature over 25 points of articulation and include their signature in game weapons and accessories. Pyro and Demoman are the first 2 characters in this new collection and include flamethrower and grenade launchers respectively.
Each figure will include a special in-game code that customers can use to unlock special in-game bonuses when they play!
This Listong is for Pyro.
Upc: 634482 45057-4
|
From one of the best selling and most successful games in the Valve library - comes this collection of detailed action figures faithful to the animated look of the characters.
The figures stand over 6.5" tall and feature over 25 points of articulation and include their signature in game weapons and accessories. Pyro and Demoman are the first 2 characters in this new collection and include flamethrower and grenade launchers respectively.
Each figure will include a special in-game code that customers can use to unlock special in-game bonuses when they play!
This Listing is for a set of 2 Action Figures.
Upc: 634482 45056-7
|
This Listing is for The Octopus.
|
The Rocky Balboa 'Italian Stallion' - Rocky III 12 inch Figure features:
* Hot Toys muscular body with over 22 points of articulation
* Authentic Stallone portrait
* Real fabric costume with shorts, socks, and the 'Italian Stallion' yellow robe
* Title belt
* Boxing gloves
* Interchangeable hands
* Boots
* Towel
* 12-inch figure stand with the Rocky III logo and Rocky Balboa nameplate
|
The Sith speeder does not use weapons, shields, or sensors; instead, it achieves hawk-like speed and incredible maneuverability with its potent repulsorlift engine. This one-person craft is Maul's preferred mode of transportation.
|
This Figure includes regular version of Jason with a unique mask and head sculpt.
Mask is removable and Weapon include machete and double headed axe Jason stands approx 7.5" tall and has over 25 points of articulation.
Upc: 634482 39781-7
|
This Figure includes battle damaged version of Jason with a unique mask and head sculpt.
Mask is removable and Weapon include machete and knife Jason stands approx 7.5" tall and has over 25 points of articulation.
Upc: 634482 39781-7
|
This Set includes both regular and battle damaged versions of Jason each with a unique mask and head sculpt.
Masks are removable and Weapons include machete, double headed axe, and knife. Jason stands approx 7.5" tall and has over 25 points of articulation.
Upc: 634482 39781-7
|
A Kotobukiya Japanese import! With plenty of Batman statues released over the years, Gotham city’s most evil is out to take revenge on the world. Joining the ranks of such greats as The Dark Knight Returns Batman vs. Joker is another classic Batman story come to life in Batman The Killing Joke The Joker! A 1988 graphic novel by Alan Moore and drawn by Brian Bolland, The Killing Joke is a story about Joker and how he came to be the Clown Prince of Crime. Other than an interesting origin story for him, the book also features one of the most famous scenes in the history of comics: Joker shooting Barbara Gordon (which would in turn lead to her becoming the hero Oracle). Almost as famous as its contents is Joke’s iconic cover image, captured for the first time as an ARTFX Statue!
Featuring a portrait inspired by the graphic novel cover art coupled with an original pose by Kotobukiya, this new statue brings the maniacal clown to life as you’ve never seen him before. Joker stands with one foot resting on a crate of dynamite, smiling his huge toothy grin as he snaps a photo on his old school film camera. The sadistic villain’s costume is incredibly detailed, showing off every seam, cuff, button, crease, and more on his purple three piece suit and trench coat. His outfit is even topped off by authentic studded spats, fedora, iconic white gloves, and lapel-pinned flower. The Joker’s elongated white painted face leaps right off of the graphic novel cover with its deep laugh lines, left eye squeezed shut, and unruly green hair peeking out from under his hat. There’s even a motion sensor built into the base that activates an LED spot lamp and camera shutter sound after a brief delay. As an added bonus, the lamp is movable and can be placed at any angle around the statue!
Sculpted by Junnosuke Abe, The Killing Joke Joker stands 11 inches tall (1/6th scale) on a special display base that includes the broken crate of dynamite, LED lamp, and a creepy cherub henchman. The Joker is an incredible statue capturing one of the most famous graphic novels of all time, and he’ll look great on display or alongside other DC Comics-inspired statues from Kotobukiya like the Batman Black Costume Ver. Lights, camera, action!
|
A Kotobukiya Japanese import! Kotobukiya’s line of DC Comics “New 52” ARTFX+ Statues continues, capturing the new looks and costumes of heroes in the Justice League. Joining the previously released Superman, Green Lantern, and Flash is the half-Atlantean Aquaman! A former ruler of Atlantis who seeks to defend the world both above and below the waves, Arthur Curry is a powerful warrior and leader. While it has been revealed that he has had previous adventures with other teams, Aquaman’s first major public appearance in the relaunched New 52 continuity was in the pages of Justice League, joining the other heroes against Darkseid and his forces.
The current incarnation of Aquaman makes the character larger than life, with strength, intelligence, and powers that make him a valued member of the Justice League. Arthur appears here in the ARTFX+ lineup with a fantastic representation of those heroic ideals, standing with all of the quiet grace of an otherworldly ruler. Aquaman’s iconic costume is captured with every fine detail from the intricate overlapping scales of his metallic orange armor to the creases and pointed fins on his green pants and gloves. The muscular aquatic hero holds his mighty trident in his right hand, calmly staring down the threats arrayed before him from under his wavy blonde hair.
Standing nearly 8 inches tall (in the ARTFX+ 1/10th scale), Aquaman was sculpted by master artist Goutaro Takeuchi (Atelier Bamboo). Like the other Justice League members Aquaman has magnets in his feet for perfect stability on the included display base, and he’ll look great displayed on your shelf by himself or alongside his teammates.
Upc: 603259028452
|
A Diamond Select Release! Designed and Sculpted by Art Asylum! Mutants and humanity have had their differences, but they have a mutual enemy: the Brood! This interstellar race of parasites has preyed on men and X-Men alike, and this wave of Marvel Minimates includes three all-new comic-based two-packs: Rogue with Colossus, Longshot with Dazzler, and Wolverine with a Brood.Each Minimate stands 2 inches tall with 14 points of articulation and a variety of removable and interchangeable parts and accessories. The figures in this assortment will only be available in comic shops and specialty stores, so don't miss out!
|
Godzilla Millenium was the twenty-third film released in the Godzilla series. Toho released the film in Japan in 1999.
This nicely detailed PVC figure stands 6 1/2 inches tall and has articulation in the shoulders and legs.
|
With over 50 years of history, Godzilla, the most powerful pop icon, inspired these semi-articulated soft vinyl figures.
|
With over 50 years of history, the most powerful pop cultural icon is being recreated in these figures! Collectors and kids can both revel in the detailed craftsmanship of these soft vinyl figures. Collect them all!
|
With over 50 years of history, the most powerful pop cultural icon is being recreated in these figures! Collectors and kids can both revel in the detailed craftsmanship of these soft vinyl figures. Collect them all!
|
With over 50 years of history, Godzilla, the most powerful pop icon, inspired these semi-articulated soft vinyl figures.
|
With over 50 years of history, Godzilla, the most powerful pop icon, inspired these semi-articulated soft vinyl figures.
|
Kick-start some epic comic action with this awesome X-MUTANTS figure! This intense figure is heavily armed and seriously detailed to look like one of the powerful X-MUTANTS of MARVEL's comic battles. Arm her with her many weapons and send her into the fray, or set her on her display stand in your collection. Gear up with your X-MUTANTS figure!
This Listing is for Mystique.
|
Each Marvel Legends 2012: Series 03 figure features multiple points of articulation, and is accompanied by character-specific weapons/accessories and one of the pieces required to assemble the Series 03 Build-A-Figure. Deadpool is equipped with a pistol, twin katana swords, and an assault rifle. Generated as part of the Weapon X program, Deadpoolâ?TMs regenerative ability provides him with a subjective variant of near-indestructibility in addition to enhanced strength, agility and reflexes. This process also simultaneously disfigures him and contributes to Deadpoolâ?TMs characteristic insanity. In his capacity as mercenary assassin, Deadpool is an expert swordsman and marksman, and an extensively trained martial artist. He appears in early issues of X-Force, and later, despite Cyclopsâ?TM intention to disband X-Force, Wolverine creates a new team, apart from Cyclops and the X-Men, which includes Psylocke, Archangel, Fantomex and Deadpool.
|
Each Marvel Legends 2012: Series 03 figure features multiple points of articulation, and is accompanied by character-specific weapons/accessories and one of the pieces required to assemble the Series 03 Build-A-Figure. Iron Man (Neo-Classic) is clad in bulky gold and red armor. The Iron Man armor is constructed as a housing for the transistorized chest plate used to save the mortally wounded Tony Stark. Modified numerous times even prior to Iron Manâ?TMs association with the Avengers, the original Iron Man Armor utilizes transistor and magnetic repulsor technology which provides Stark with flight capability, heightened strength and durability, and a variety of onboard weapons. The immensely durable Neo-Classic armor resists virtually any form of damage, however the chassis itself is cumbersome. The armor is armed with a strengthened version of the Repulsor, along with Vibration Beams and Vario-Chestbeams.
|
This Listing is for Dr.Doom.
|
This Listing is for U.S Agent.
|
"Whosoever holds this hammer, if he be worthy, shall possess the power of Thor"
Mjolnir ("that which smashes") is the hammer wielded by Thor, the Norse God of Thunder. Ordered by Odin, Chief of the Norse Gods, dwarven blacksmiths forged Mjolnir from the core of a dying star.
It has been stated by Odin himself that Mjolnir's power has no equal. Mjolnir itself is extremely durable like the Earth metal Adamantium and combined with the various enchantments placed upon it by Odin, is for all intents and purposes, indestructible.
- Full Scale, 1:1, Officially licensed prop replica
- Limited Edition - Edition size determined by the pre-order
- Made from the original master patterns and molds used to make the screen used prop
- Quality, hand finished resin, polystone, leather and metal construction
- Special "Mirror Chrome" paint
- Real leather strap and handl inlay
- eFX display base
- Prop Story/Certificate of Authenticty
- Individually Numbered plaque
|
*Realistic Headsculpt
*Brand New M16 rifle
*Exquisite M16 rifle case
*Three types Delicate watches
*New all-era Body with three pairs of hands
*Green shirt
*Khaki greatcoat
*Black suit
*Black trousers
*Black socks
*Red tie
*Black leather shoes
|
Disney Cinderella Fairytale Castle: Girls will love bringing Cinderella's fairytale to life with this beautiful castle inspired by the beloved Disney movie. The castle opens to display five play areas inside in which to play out the entire fairytale. The clock tower turns to reveal Cinderella's attic bedroom where, with a turn of a dial on her dressing screening, her bird friends reveal her pink gown as it pops out from inside. With a beautiful Cinderella doll and three sparkling MagiClip™ fashions, girls will be able to reenact key scenes from the entire movie. Includes a castle filled with furniture, 3 MagiClip™ fashions and accessories. Doll cannot stand alone.
|
All the players are massing, the stage is set, and only you can control their fate now. Arm your Masters of the Universe® Classics figures with an assortment of weapons and accessories they’ll be proud to carry. Includes a variety of all-new and lost weapons, armor and shields, redecorated, refreshed and ready for battle!
•Repaint of Teela® weapons in classic toy colors
•Fan-demanded Keldor™ split swords
•Man-at-Arms® 200X blaster arm cannon
•Staff of Horde Prime
•Draego-Man™ flaming whip
•Draego-Man™ shield with removable snap on flames
•Draego-Man™ unflamed “off” sword
•Temple of Darkness Zoar™
•Repaint of Chief Carnivus™ weapons
•Repaint of Clawful® weapons
|
Real Name: Adam of the House Randor
To adapt to new enemies and situations, Adam has learned to tap further into the great power that his sword unlocks. The combined Power of the Universe and the Knowledge of the Elders is called upon by Adam and channeled through the Sword of He to create new forms of armor and weapons to combat evil. His Battle Armor® was created to protect He-Man® during his early battles with Skeletor® and his evil warriors. Using the Power of Grayskull™, He-Man® — The Most Powerful Man in the Universe™, is now shielded by his mighty Battle Armor®!
You must be 18 or older to purchase this product.
|
This villainous vixen gives the green movement a bad name. Not just an idealistic tree hugger, Dr. Pamela Isley is a proud plant-American who clings to the idea there’s a “mulch” better way to run the world… and she’s ready to seal the deal with a toxic kiss. This highly fan-demanded figure features green skin deco and three removable vines that cozily curl up her arms and legs.
You must be 18 or older to purchase this product.
Pre-Order, Sold Out Available: July
|
This villainous vixen gives the green movement a bad name. Not just an idealistic tree hugger, Dr. Pamela Isley is a proud plant-American who clings to the idea there’s a “mulch” better way to run the world… and she’s ready to seal the deal with a toxic kiss. This highly fan-demanded figure features green skin deco and three removable vines that cozily curl up her arms and legs.
You must be 18 or older to purchase this product.
|
Hollywood is used to starlets shrinking down a few dress sizes, but actress Rita Farr has a much bigger issue. As Elasti-Girl she can grow to towering heights or shrink to microscopic size… not a good look for the red carpet but very handy as a core member of the Doom Patrol. This oversized figure also arrives with a mini Elasti-Girl figure!
You must be 18 or older to purchase this product.
|
